52
Staged
Laser
Wakefield
Accelerator: Dual
Capillary Discharge with Plasma Lens Coupling--ICARUS
Research, Inc.,
7113 Exfair Road,
Bethesda,
MD
20814-5504; 301-467-4346, www.icarusresearch.com
Dr.
Arie Zigler, Principal Investigator, solcat9@aol.com
Dr.
Bahman Hafizi, Business Official, solcat9@aol.com
DOE
Grant No. DE-FG02-02ER83461
Amount:
$600,000
The
gradients associated with plasma-based accelerators, such as a laser
wakefield
accelerator, are much larger than those in
conventional accelerators. To
realize the potential of a laser
wakefield
accelerator and obtain high-energy electrons, it
is necessary to (1) provide a means to guide the laser beam, and (2) stage the
accelerating module to reduce dephasing. This
project will address both issues and perform experiments to achieve electron
energies approaching 1 GeV. Gas-filled
capillary discharges will be employed to optically guide the laser beam over
extended distances. To mitigate
dephasing in a laser
wakefield
accelerator, two or more capillaries, placed
end-to-end with increasing plasma density, will be configured.
In Phase I, design parameters were obtained using scaling models and
reduced analytical models. Particle-in-cell
simulations, employing massively-parallel, fully-electromagnetic codes, were
then employed to refine the design. Phase
II will conduct experiments that employ a 10 Hz, 10 TW, and 50 fs Ti-sapphire
laser beam. A fraction of the beam
will be extracted and utilized for the injector, and the rest will be used to
drive a
wakefield
in a plasma channel made up of several
capillaries, each of which has a uniform density along the direction of
propagation. Accelerated electrons
will be detected and analyzed by employing dipole magnets, Čerenkov
radiation, and nuclear activation.
Commercial Applications and Other
Benefits
as described by awardee: High
gradient, compact accelerators would have applications in free-electron sources
of radiation for medical diagnostics and remediation.
Plasma channels should have applications in guiding, transporting, and
shaping intense laser beams.